[UPDATE][LOLLIPOP] Android lollipop 5.0 ROM for Micromax A106 Unite 2

Download: 

Lollipop firmware (UsersCloud | Mediafire)Drivers (Download | How to install drivers)SP Flash Tool (Download)

This Lollipop firmware can be flashed in both 4 GB as well as 8 GB model. You don’t need to flash stock Kitkat ROM before flashing this firmware.

Make Backups before flashing:

NVRAM BackupNandroid Backup

To flash Lollipop firmware follow these steps:

Step 1: Unzip/extract downloaded firmware using 7-Zip, winrar, etc. You’ll get 16 files as shown in screenshot below

Step 2: Open SP Flash tool and click Scatter-loading button as shown below

Step 3: Select MT6582_Android_scatter.txt from downloaded firmware folder

Step 4: 
a) Select Firmware Upgrade from drop-down menu.
Make sure all files are loaded as shown in below screenshot. If any file failed to load automatically then load that file manually by clicking Location (last) column of that file.
b) Remove battery from phone for few seconds then insert battery (Don’t switch on)
c) Click Download button in SP flash tool
d) Connect phone via USB cable in switched off mode
e) Wait for 4-5 minutes to complete flashing.
If phone starts charging battery it means phone is not detected by SP flash tool. Click Stop button in SP flash tool. Remove USB cable. Reinsert battery, click download then connect phone via USB cable. If still doesn’t respond then try flashing without battery.

Step 5: After successful flashing you’ll see a message with green circle. Now remove USB cable and switch on phone normally.

Screenshots:

Check Screenshots HERE

If you want to downgrade to Kitkat then click HERE